Smaer Inserter 20 Laser Printer
- Semi-automatic system for embedding a chip, contact plate or fingerprint sensor on a card.
- Suitable for pilot projects and prototyping before mass production.
- Possibility to adjust temperature (up to 300°C), pressure (up to 6 bar) and pressure time (up to 20 seconds).
- Requires compressed air to operate the device.
- Can be used in small projects, prototypes and special cards with special materials or designs.
Smaer Inserter 20 Laser Printer objective and positioning
The Smaer Inserter 20 Laser Printer is a semi-automatic presser heads system allowing pressing 1 or several times a chip module, an ISO plate or a fingerprint sensor on a card. The 2 presser heads allow reproducing a standard embedding process, typically with the first head heating the component, and the second head cooling it. Each embedding parameters can be controlled including the pressing temperature, the pressing time, and pressure force.
This simple and affordable system allows performing various embedding tests on cards in a view tuning a process before implementing it into a bigger system like the SI700. For some particular projects where: specific or new components need to be embedded on cards, like a particular fingerprint sensor, particular card material needs to be used, like metal cards or others, a particular/new adhesive and/or conductive glue need to be used, a particular embedding process, a pilot, experiment or tests need to be conducted using a small quantity of cards, then the SI20 is the perfect system to exercise these new elements and related embedding parameters on a small quantity of cards, before launching a production.
The Smaer Inserter 20 Laser Printer is mainly used for engineering purposes. It avoids using a production system to exercise a new technology or new card products. It has been designed to bring a maximum of flexibility: All embedding process parameters are adjustable: temperature, pressure force, pressure time. It can embed chip modules, contact plates and fingerprint sensors in any position on the card, except 1mm from the right/left edge of the card, and 2mm from the top/bottom of the card.
Presser heads can be easily changed to accommodate the component design, depending on the chip module / contact plate fingerprint sensor used. It supports various card materials: PC, PVC, ABS, PET, composite, metal. It can be used to manually produce small volumes of cards, including: Contact cards, with a single chip or with multiple chips, Dual interface cards Biometric cards.
| Preliminary Conditions | A cavity must be milled on the card according to chip or sensor specifications. Module/contact plate/sensor film should be laminated with appropriate adhesive. |
|---|---|
| Dimensions | H 336 mm × W 396 mm × L 450 mm |
| Embedding Placement Accuracy | Manual |
| Compressed Air Requirements | Pressure: 6 bars, Consumption: 8 L/min |
| Power Supply | Voltage: 100–240 V AC, Frequency: 50/60 Hz |
| Card Type | Standard ISO/IEC 7810 ID-1; Thickness: 30 mil (±10%) |
| Supported Card Materials | Polycarbonate, Composite, PVC, ABS, Metal cards |
Related products
SMART EVOL SE1000 Laser Printer
- Suitable for laser printing and engraving on PVC, PET and even metal cards
- High production speed up to 1000 cards per hour
- Supports Fiber, CO₂ and UV lasers
- Ability to print text, photos, logos, barcodes and security elements
- Ability to add various modules (laser printing, card coding, magnets, quality control, etc.)
Smart Punch SPu20 module
- Device type: Manual punch module for smart cards
- Application: Preparing the card for inserting a chip, contact plate or fingerprint sensor
- Function: Precise punching of the film layer or card in a controlled manner
- Tool set: Includes punch kits for various parts
- Highlight: Can be combined with other card making tools such as SI20
Reviews
There are no reviews yet.