Smart Inserter 700 Laser Printer
- It is possible to install a chip, contact plate or biometric sensor on the entire surface of the card.
- Speed: up to 700 cards per hour
- The insertion operation is performed by the Pick & Place system.
- Press time up to 20 seconds
- Pressure up to 6 bars
- From ambient temperature to 250 degrees Celsius
Smart Inserter 700 Printer overview
Smart Inserter 700 Designed to target multiple markets including Financial, ID, Access Control, Telecom and others, the SI700 is a midrange system able to embed chips, contact plates or fingerprint sensors into cards.
Chip or sensor embedding in any position
Configuring the system for chips or for sensors only takes few minutes and just requires changing a toolkit. The system can embed fingerprint sensors in any position on pre-milled cards. This capability solves the manufacturing issue resulting from the lack of standards for biometric cards on the sensor position.
and in any direction
Depending on the card design, the SI700 can adapt the fingerprint sensor orientation on the card during embedding. Once the sensor is punched and removed from the sensor film, the embedding station can turn the sensor orientation to 90°, 180°, 270° when needed so that the sensor contact pads can properly connect with the right contacts on the card inlay.
| Preliminary Conditions | – A cavity must be milled on the card according to chip/sensor specifications. – The chip, contact plate, or sensor film must be laminated with glue. |
|---|---|
| Rated Speed | Up to 700 cards/hour (throughput depends on pressing time of chip/plate/sensor). |
| Cutting Accuracy | ± 30 µm (tooling designed per chip/plate/sensor specification). |
| Embedding Placement Accuracy | ± 50 µm (pick & place system). |
| Chip / Sensor Film | Standard S35, 35 mm (1.38 in.) – Pitch: 14.25 mm or 9.5 mm (0.37 in.) |
| Card Types Supported | ISO/IEC 7810 ID-1, 30 mil (±10%) |
| Card Materials Supported | Polycarbonate, composite, PVC, ABS (material influences glue choice and hot presser parameters). |
| System Dimensions | H 280 mm × W 340 mm × L 1500 mm (without film tape) |
| Module Weight | 60 kg (without film tape) |
| Power / Air Supply | 120V / 240V, 50/60 Hz Compressed air: 6 bars, 8 L/min |
Related products
Smaer Inserter 20 Laser Printer
- Semi-automatic system for embedding a chip, contact plate or fingerprint sensor on a card.
- Suitable for pilot projects and prototyping before mass production.
- Possibility to adjust temperature (up to 300°C), pressure (up to 6 bar) and pressure time (up to 20 seconds).
- Requires compressed air to operate the device.
- Can be used in small projects, prototypes and special cards with special materials or designs.
SMART EVOL SE1000 Laser Printer
- Suitable for laser printing and engraving on PVC, PET and even metal cards
- High production speed up to 1000 cards per hour
- Supports Fiber, CO₂ and UV lasers
- Ability to print text, photos, logos, barcodes and security elements
- Ability to add various modules (laser printing, card coding, magnets, quality control, etc.)
Smart Punch SPu20 module
- Device type: Manual punch module for smart cards
- Application: Preparing the card for inserting a chip, contact plate or fingerprint sensor
- Function: Precise punching of the film layer or card in a controlled manner
- Tool set: Includes punch kits for various parts
- Highlight: Can be combined with other card making tools such as SI20
Reviews
There are no reviews yet.